Breakdown of equipment or a machine used for work isn’t just inefficient for a schedule, but also stressful for the operator and pain for the whole working crew who are dependent on the machine. A loss of operation of one particular machinery can put a job on hold until the replacement and the repairs of that machinery take place. However, in the case of a malfunctioning air compressor, you don’t need to wait for days in repairing. There are basic things you should do.
Verify that the problem exists
A faulty compressor begins with some negative symptoms that involve either the controls, indicators or the heart of the system. Contacting a technician could be the initial step to be taken as they know all the necessary working parts and can give details about the situation at hand. Visit the website for more details on this.
Reducing the actual problem
This second step heavily depends on the technical skills, intuition and the experience of the troubleshooter. The narrowing down of the root of the issue is carried out by making use of testing equipment. You can also disassemble the various parts if nothing good comes out from making adjustments to the attachments. It involves logic and evaluation. Most compressors come with operation manuals or guide. Some others come with troubleshooting guidelines. This manual should be the main source of vital information to help eliminate a certain problem. Once it is rectified, the compressor repair can commence.
Correcting the fault
This consists of rectifying the issue. This is done by performing the compressor repair or activity that takes away the problem. It might also include calling in a replacement which is temporary like a spare part. This should be among the breakdown preparedness program of the company. Most times, a repair process might be simple as adjusting a valve or putting on a switch but it involves replacing an attachment in the system or even changing the system entirely. The cause of the issue must be taken out entirely rather than just focusing on the affected component. Failure to deal with the main issue might lead to a future breakdown.
Verifying the problem
Carrying a test of the attachment to verify the major cause of the malfunction is usually done before the system is put back on for normal service. It is important to closely check the component that resulted in the initial malfunction. This is to prove that the problem is no more in existence. This is to make sure the issue is rectified and not bringing up another problem which will result in a future breakdown.
During the process of verification, you should
- Check the various valve, the circuit breaker and switch
- Make use of approved procedures and establishing a good operating condition
- Work with the producer’s approved process
